top of page
LOGO REGRA PLAST spol. s r.o.

 

REGRA PLAST spol. s.r.o

The company REGRA PLAST spol. s ro, founded in 1999, is a manufacturing company withaiming at production from plastics. The company operates a production plant located in the village of Obora u Loun, and its main product is EUREKO roofing. The operation undergoes continuous improvement andby expanding production, which is required by the ever-increasing popularity of EUREKO coverings in the domestic marketand the foreign market.

 

 

 

EUREKO roofing

Plastic roof coverings produced since 2000 under the name EUREKO are products made from polyolefins (polypropylene and polyethylene). These raw materials are obtained by high-quality separation of waste plastics produced mainly in the automotive industry. All plastics used in production at REGRA PLAST spol. s ro are intended for applications with long-term use (plastic parts of car interiors, bumpers, furniture parts) even before being reworked into coverings. Such plastics, which have already been treated for outdoor use, are refined again with dyes, UV stabilizers and fillers during the production of coverings, so that the customer receives a product that has been treated as well as possible against the long-term effects of the weather. EUREKO coverings are guaranteed for 30 years (see warranty card).

BNC - 10 .JPG
CPS  4.JPG
DSC_0219.JPG
moderna1 mistovizualizace.jpg
IMG_6993.jpg

Advantages
roof coverings
EUREKO:

  • resists mosses, lichens and alkaline substances

  • it has a low weight

  • withstands the sun, rain, frost and sudden changes in temperature

  • it is tough, strong and resistant to trampling

  • muffles noise

  • is maintenance-free

  • it perfectly imitates not only natural materials

  • the guarantee for the covering is 30 years

Projects:

REGRA PLAST spol. s r.o. Projekt spolufinancován EU.

OP PIK Energy savings - VI. call

The main goal of the presented project is to reduce the energy intensity of the production process of REGRA PLAST spol. s ro, thanks to the implementation of energy measures related to reducing the energy demand/increasing the energy efficiency of production and technological processes, when 2 pcs of energy-intensive injection presses in the production of plastic products will be replaced.

 Project number: CZ.01.3.10/0.0/0.0/20_370/0024039

Implementation of other energy measures within the production process at REGRA PLAST spol. s.r.o

The project is co-financed by the European Union.

REGRA PLAST spol. s r.o. Projekt spolufinancován EU.

OP PIK Innovation vouchers – IV. call

The main goal of the presented project is the development of cooperation between the business and research spheres, namely in the area of completing the development of a new type of plastic roofing product intended for the implementation of so-called sloping green roofs and its subsequent certification and issuance of a European Technical Assessment (ETA) and assessment and verification of technical properties of a construction product with high technical and utility parameters.

Project number: CZ.01.1.02/0.0/0.0/18_215/0022137

Strengthening the cooperation of REGRA PLAST spol. s ro with research institutions in the certification and verification of new products.

The project is co-financed by the European Union.

Obrázek1_edited.jpg

NPO Photovoltaic systems with/without storage - I. challenge

The main goal of the project is therefore the installation of a PV plant with a capacity of 202.95 kWp without energy storage at the company's operational facilities, which will enable the company to cover part of its electricity consumption with the help of renewable sources. The project is designed and complies with the conditions and parameters of the program Photovoltaic systems with/without storage - I. call.

Project number: CZ.31.3.0/0.0/0.0/22_001/0000309

Construction of a PV plant with an output of 202.95 kWp on the premises of REGRA PLAST spol. s.r.o

The project is co-financed by the European Union.

REGRA PLAST spol. s r.o. Projekt spolufinancován EU.

OP PIK Energy savings – IV. call

The main goal of the presented project is to reduce the energy intensity of the production process of REGRA PLAST spol. s ro, thanks to the implementation of energy measures related to reducing the energy demand/increasing the energy efficiency of production and technological processes, when 2 pcs of energy-intensive injection presses in the production of plastic products will be replaced.

Project number: CZ.01.3.10/0.0/0.0/18_183/0017113

Implementation of energy measures within the production process at REGRA PLAST spol. s.r.o

The project is co-financed by the European Union.

EU.jpg

NPO Photovoltaic systems with/without storage - I. challenge

The main goal of the project is therefore the installation of a PV plant with a capacity of 202.95 kWp without energy storage at the company's operational facilities, which will enable the company to cover part of its electricity consumption with the help of renewable sources. The project is designed and complies with the conditions and parameters of the program Photovoltaic systems with/without storage - I. call.

Project number: CZ.31.3.0/0.0/0.0/22_001/0000309

Construction of a PV plant with an output of 202.95 kWp on the premises of REGRA PLAST spol. s.r.o

The project is co-financed by the European Union.

bottom of page